UHF RFID Reader,RFID Scanner,Handheld Terminal,RFID System Solution

The RFID-based animal identification and tracking management system consists of three parts: RFID radio frequency card, RFID reader writer and computer network. The reader is generally used as a computer terminal to implement data reading and writing and storage of the RFID radio frequency card. It is composed of a control unit, a high frequency communication module and an antenna. When a pig with a "ear stud" (RFID card) enters the RF field of the reader, the induced current obtained by UHF RFID antenna is boosted by the booster circuit and used as the power source of the chip, and the induced current with information is passed through the RF. The front-end circuit detects that the digital signal is sent to the logic control circuit for information processing; the information required to be recovered is retrieved from the memory and sent back to the RF front-end circuit via the logic control circuit, and finally sent back to the reader through the antenna.

It mainly includes three parts: basic data management, error prevention management and traceability management. The overall goal is to establish a comprehensive, integrated, advanced, and stable quality error prevention system, monitor key component assembly, and prevent artifacts from causing process leakage. It can standardize the product operation process and strictly requires the operation according to the product process. It solves the problems of lack of assembly operation guidance, error timely correction, serious error and timely termination in the production assembly process, real-time monitoring, timely response, and immediate solution. The error-proof tracing system needs to adopt a unified information means to install the one-dimensional/two-dimensional bar code, RFID and other information records on the assembly line, and through the real-time scanning and comparison of the PDA handheld terminal , whether the assembly meets the requirements through the in

The attendance of personnel at construction sites has certain special characteristics: first, the flow of people is large; second, the cultural level of most workers is low; third, the frequency of changes in staff is relatively fast. Therefore, there is a special requirement for the attendance system of the entrance and exit of the construction site: first, the large capacity, followed by the operation, and finally the system update procedure should be simple and quick. UHF RFID readers are installed in the entrance and exit of the construction site at the construction site. Stickers of self-adhesive RFID passive electronic tags are attached to the helmets of the construction workers, and the check-in or sign-off is automatically completed when the helmets enter and exit the passage. In this system, workers entering and leaving the site must wear helmets. Therefore, the helmet can be used as a medium in the system. By binding the electronic tag with the work

At present, the pharmaceutical industry is currently facing the problem of the proliferation of counterfeit and inferior drugs. Some lawless elements are driven by interests to create counterfeit drugs, which threaten people's lives when they take them. With the rapid development of RFID technology, the medical industry in many cities has begun to apply RFID technology. Many hospitals have begun to use RFID handheld reader for ward inspections, and most importantly, RFID technology and handheld terminal products are It has also played a huge role in drug anti-counterfeiting, tracking and supply chain management. Using RFID technology, when the drug is shipped from the factory, the RFID tag is attached to the drug package, which becomes an inseparable part of the drug. The RFID tag carries all the information. The principle of RFID used for anti-counterfeiting in commodity anti-counterfeiting is to identify the product (The ID), ie the security code (which is enc

The RFID access control system has already surpassed the traditional doorway and key management functions. The safety requirements of the modern working environment, departmental administrative management, daily attendance management, company catering consumption, etc., are all closely related to the access control system. Such as apartments, residential quarters, factory patrols, company R & D and technical departments, medical units do not disturb areas, finance and finance, etc., are the best places for RFID access control system applications. The installation of an RFID access control system in public places and entrances in some office places, residential apartments, etc., can effectively prevent unauthorized people from entering, and maximize the safety of these places. In practical applications, in order to achieve a more safe use effect, the application of open access control systems often includes the comprehensive application of open and non-open access

The emergence of RFID tool management applications has realized the efficiency and intelligence of tool management. Through the installation of special customized tool cabinets with UHF RFID readers and the installation of UHF passive anti-metal tags, the accuracy and efficiency of tool management can greatly improved. And the sharing of information across departments and departments. For different industries, RFID tool management has different requirements and implementation methods. Here are some common applications: 1. Railway line maintenance equipment management, after installing RFID electronic tags for each tool, you can install RFID UHF readers at the door of the warehouse to identify the incoming and outgoing tools and authorization management, or install ultra-high on the construction vehicles. Frequency reader, real-time monitoring of tools on the vehicle. 2. Aircraft maintenance equipment management. RFID tags are placed on parts and tools,

Smart retail cabinets can be opened and taken, that is, take away, each layer is replaced by an UHF RFID antenna , and an RFID electronic tag is attached to each product for automatic real-time reading. The quantity and attributes of the goods in the vending machine. The specific shopping process is: Step 1: The user downloads the APP (or WeChat, Alipay applet) with the smart phone. After registration, the user has the right to open the vending cabinet door lock by scanning the QR code. After opening the door, the user can directly take the smart. Goods in the vending cabinet. The second step: the selection of goods, not much to say here, the selection process is no different from ordinary supermarkets or ordinary sales containers. The third step: closing the door payment, closing the door after the purchase of the goods, the smart retail cabinet starts the internal inventory program, using fixed RFID reader to identify the RFID electronic tag inside the cabinet, the

Traditional supermarkets provide us with convenience, but it is not difficult to find out, such as the supermarket price tag replacement is not timely or error, the supermarket goods are frequently stolen, the variety of perishable goods can not be monitored and replaced in time, etc. With the maturity of the Internet of Things technology, these problems will be well resolved. 1. Intelligent price tag system The price tag in the smart supermarket will be replaced with an LED display, and an RFID tag will be attached to each item, and an UHF RFID antenna and a microcomputer processor will be installed on the shelf. When the tally is placed on the shelf, the multiple RFID reader detects the item and contacts the price control system to return the latest price to the on-board microcomputer processor, which is then quickly displayed on the LED display. 2. Inventory control system When a consumer attaches an RFID tag-equipped product to a shopping cart with an RFI