Skip to main content

Intelligent Parking Lot Management System Based on UHF RFID

 

Apply RFID technology to the management of modern parking lots, it can effectively manage the parking lot. It has the characteristics of orderly entry and exit of vehicles, simple procedures, fast speed, safety and anti-theft, management automation, fair and reasonable fees, no loss of fees and fewer management personnel. Access to database and internet, through the Internet, it can even be extended to the unified management of the parking lot of the entire city and even the entire country, thus solving the shortcomings of single parking lot management and not universal.


Introduction to RFID principle

RFID is mainly composed of a UHF RFID tags as a data carrier, a UHF RFID reader for reading the data in the card, and a software control platform.When the vehicle equipped with UHF RFID tag enters the magnetic field, it receives the radio frequency signal from UHF RFID reader,tag sending out product information stored in the chip(Passive, passive tag) or actively send a signal of an UHF frequency((Active, active tag), after the UHF RFID reader reads and decodes the information, it is sent to the central information system for relevant data processing.


System hardware overall structure

1)UHF RFID READER

The reader is mainly composed of radio frequency transmitting and receiving circuit and MCU.When the ground induction coil senses that the vehicle enters and exits, the computer sends a command, and the corresponding reader turns on the electromagnetic emission signal to activate the tag entering the work area. At the same time, the reader amplifies the UHF carrier signal sent by the received tag transmitter. After modulation and decoding, it becomes a digital signal and sends it to the computer.

Shine 340 IoT Smart Reader


2)Tag


Composed of processor, memory, antenna in tag, and modulation and demodulation circuit. The tag is usually in a sleep state. When it enters the working area of the system, it is activated by the radio signal from the antenna and emits a unique encrypted identification code radio signal.The radio signal from the reader's antenna provides energy for the normal operation of the passive tag and the transmission of UHF electromagnetic waves.


3)Controller

The controller realizes the communication between the MCU and the computer, controls the data transmission between the reader and the computer, the data collection of the ground induction coil and the vehicle induction system,and preprocess the collected data.


System software structure

The database and multi-threaded technology are used to realize the management system of data collection and information processing. It has the functions of label reading and writing setting and information management, data statistics, real-time display, historical data query, system update and maintenance. In addition, the database system can also provide Web-based Network publishing and query functions.


Shenzhen Hopeland Technologies Co., Ltd, come from china----a professional hardware service provider. Since 2009, we are specialized in developing, researching and manufacturing series of UHF RFID readers, handheld terminals, Antennas , special type Tags, Middleware, system software, etc. Experienced R&D team and strong production center help to output quality products based on Indy R2000/PR9200 chipset, which passed CE, FCC, CCC, SRRC and series of certificates. With core advantages of long reading distance, excellent multi-tag reading, advanced anti-collision algorithm, various communication interfaces, different operation systems &SDK choices, industrial level, our devices are widely used in areas of ETC, Intelligent Parking, Airport, Smart New Retail, Smart Grid, Assets Tracking, Warehousing& Logistic, Supply Chain, Industry 4.0 and so on.


If you have any questions, please contact us immediately!

Labels:

Comments

Post a Comment

Popular posts from this blog

Public Hospital in Zhejiang Accelerates the Upgrade of RFID Material Management Solutions

A few days ago, the General Office of the Zhejiang Provincial Government released the "Implementation Plan for Promoting the High-Quality Development of Public Hospitals in Zhejiang Province", which clearly stated that "the operation mode has shifted from extensive management to refined management" and "doing reasonable use of medicines, monitoring of medical consumables and medical core data”, which put forward new requirements for the management mode of consumables in public hospitals. In 2019, the First Affiliated Hospital of Zhejiang University College of Medicine introduced the SPD model for hospital ma terial management . The "smart update" was carried out on the previous SPD model. The hospital fully combined the latest technological means such as the Internet of Things, robots, artificial intelligence, big data, and image recognition to create a new "IF-SPD" model. The overall construction of "IF-SPD" inc...
Post a Comment
Read more

RFID Technology Optimizes Self-service in Restaurants

Smokin' Oak Wood-Fired Pizza & Taproom is a growing franchise that combines a pizzeria with a self-serve bar wall, offering fast casual dining across the United States. The company operates five stores and has plans to expand as many as 75 stores over the next few years. The company was originally designed to offer the old-fashioned way of ordering food—with the help of a cashier or bartender at a traditional bar. But its Omaha store offers a self-serve pouring booth powered by RFID technology. The company's CEO, Matt Mongoven, said the model will be replicated in all subsequent stores. The self-service system in this self-service pouring booth utilizes RFID self-pouring t echnology . Pizza and self-service tap facilities are under one roof. When customers arrive, the cashier asks if they would like to use the self-filling bar wall. If they answer "yes", the cashier scans their license and scans the RFID wristband with the restaurant's logo, ...
Post a Comment
Read more

Wal-Mart Will Expand RFID Applications To Improve Its Inventory Accuracy

  It is reported that Wal-Mart's headquarters has notified suppliers to expand its   RFID e-tags   to some new product categories. As of September, these newly expanded products will carry   R FID e-tags   on Walmart store shelves. The new areas of expansion include the following: 1. Consumer Electronics (such as TV, xbox) 2. Wireless Devices (such as mobile phones, tablets, accessories) 3. Kitchen And Dining 4. Home Decoration 5. Bathtubs And Showers 6. Storage And Organization 7. Car Battery ... As early as 2005, Wal-Mart required its top 100 suppliers to adopt RFID technology. The introduction of RFID tags has further increased the efficiency of Wal-Mart's supply chain; previously it took hours for all retail store staff to check what's on the shelf, but now it can be done in 30 minutes. Automated workflows based on RFID technology can automatically place orders, sort and screen. After using RFID technology, the system automatically generates electronic order...
Post a Comment
Read more